|
•EXHAUST SYSTEMS
|
|
| |
|
NEW
for A4 8E
2002!!!!
 |
 |
| |
|
| .A4 QUATTRO |
PRICE |
| ..2.5" T304 Stainless Steel piping - Downpipe included with 1.8T |
| ..All Mandrel bent |
| ..Dual 3" chrome polished tips, angle cut, inward bevel, resonated |
| ..Stainless Steel muffler and resonator, 16-gauge steel, welded construction |
| ..Uses OE hanging points, Stainless Steel hangers |
| ..Black Hi-temp paint finish |
| ..All mounting hardware included |
| ..Weight savings approx. 25lbs |
| ..HP increase 8 to 10 with low restriction air filter |
| ..Approximate installation time: 40 minutes (professional) |
| ..Lifetime warranty to original purchaser (proof of purchase required) |
..SPECIFICATIONS SUBJECT TO CHANGE
. |
|
| .A4 FRONT WHEEL DRIVE |
PRICE
|
| ..2.25" T304 Stainless Steel piping |
| ..All Mandrel bent |
| ..Dual 3" chrome polished tips, angle cut, inward bevel, resonated |
| ..Stainless Steel muffler and resonator, 16-gauge steel, welded construction |
| ..Uses OE hanging points, Stainless Steel hangers |
| ..Black Hi-temp paint finish |
| ..All mounting hardware included |
| ..Weight savings approx. 25lbs |
| ..HP increase 8 to 10 with low restriction air filter |
| ..Approximate installation time: 40 minutes (professional) |
| ..Lifetime warranty to original purchaser (proof of purchase required) |
..SPECIFICATIONS SUBJECT TO CHANGE
. |
|
| .S4 QUATTRO CAT-BACK EXHAUST SYSTEM |
PRICE
|
| ..3" T304 Stainless Steel piping (3 pcs) |
| ..All Mandrel bent |
| ..Dual 3" Chrome polished tips, angle cut, inward bevel, resonated |
| ..Stainless Steel muffler and resonator, 16-gauge steel, welded construction |
| ..Uses OE hanging points, Stainless Steel hangers |
 ..Black Hi-temp paint finish
..All mounting hardware included
..Weight savings approx. 25lbs
..HP increase 8 to 10 with
low restriction air filter
..Approximate installation time: 40 minutes (professional)
..Lifetime warranty to original purchaser (proof of purchase required) |
....SPECIFICATIONS SUBJECT TO CHANGE
. |
$799
|
| .A6 QUATTRO 2.7T & 4.2 - S6 4.2 |
PRICE
|
| ..Dual system |
| ..2.5" T304 Stainless Steel piping |
| ..Mandrel bent |
| ..Single 3.5" chrome polished tip per side, angle cut, inward bevel, resonated |
| ..Stainless Steel mufflers (2) and resonators (2), 16-gauge steel, welded construction |
| ..Uses OE hanging points |
| ..Stainless Steel hangers |
| ..Black Hi-temp paint finish |
| ..All mounting hardware included |
| ..Free Flow air filter included |
| ..Weight savings approx. 40lbs |
| ..HP increase of 15 (with 94/5 Ron) and 25 with LLTEK Cold Air Induction Kit |
| ..Approximate installation time: 1 hour (professional) |
| ..Lifetime warranty to original purchaser (proof of purchase required) |
|
Effective immediately all LLTek-supplied exhaust systems for the A6 2.7T, A6 4.2, S6 4.2, and A6 allroad will be "valance through" cat-back stainless steel systems replacing the previous underhang cat-back stainless steel system. Every 2.7T system (pre-facelift with no backup sensors) will come with 2 adjustable floating valance trims available in valance-matching dark gray or optional cost silver - specify your choice.
All other pre-facelift A6 systems will come with a modified thin trim surround design (again black or silver) designed to clean up any rough edge cuts in the cut area to make the opening. Post-facelift systems will be available shortly - call.
Note: all systems for both pre and post-facelift A6 models will come with adjustable hangers - effective February 10, 2002.
|
|
|
|
| |
| |
|
..SPECIFICATIONS SUBJECT TO CHANGE
.. |
$1077
|
| .TT QUATTRO CAT-BACK EXHAUST SYSTEM |
PRICE
|
| ..2.5" T304 Stainless Steel piping |
| ..Mandrel bent where possible |
| ..Quad 3" Chrome polished tips, angle cut, inward bevel, resonated |
| ..Stainless Steel muffler and resonator, 16-gauge steel, welded construction |
| ..Uses OE hanging points, Stainless Steel hangers |
| ..Black Hi-temp paint finish |
| ..All mounting hardware included |
| ..Weight savings approx. 25lbs |
| ..HP increase 8 to 10 with low restriction air filter |
| ..Approximate installation time: 40 minutes (professional) |
| ..Lifetime warranty to original purchaser (proof of purchase required) |
..SPECIFICATIONS SUBJECT TO CHANGE
. Rear Valance for Quad Sysytem
. unpainted
. painted |
|
| .TT FWD CAT-BACK EXHAUST SYSTEM |
PRICE
|
| ..2.5" T304 Stainless Steel piping (3 pcs) |
| ..Mandrel bent where possible |
| ..Quad 3" Chrome polished tips, angle cut, inward bevel, resonated |
| ..Stainless Steel muffler and resonator, 16-gauge steel, welded construction |
| ..Uses OE hanging points, Stainless Steel hangers |
| ..Black Hi-temp paint finish |
| ..All mounting hardware included |
| ..Weight savings approx. 25lbs |
| ..HP increase 8 to 10 with low restriction air filter |
| ..Approximate installation time: 90 minutes (professional) |
| ..Lifetime warranty to original purchaser (proof of purchase required) |
..SPECIFICATIONS SUBJECT TO CHANGE
. Rear Valance for Quad Sysytem
. unpainted
. painted |
|
|
•A8 SWB EXHAUST Muffler
|
PRICE
|
..Design integration for 3.7 litre, 4.2 litre and S8
..T304 Stainless Steel Piping
 ..All Mandrel Bent
..Dual 3" Chrome Polished Tips
..Angle Cut with Inward Bevel and Resonated
..Stainless Steel Hi-Flow Construction
..Uses OE hanging points,
..Stainless Steel hangers
..Black Hi-temp paint finish
..All mounting hardware included
..Lifetime warranty to original purchaser *
..*(proof of purchase required) |
..SPECIFICATIONS SUBJECT TO CHANGE
. |
$555 |
