Click and View LLTeK Main Home Index - LLTeK Banner - Audi section
Click and View Audi A3 Body Kit Styling and Tuning Click and View Audi A4 Body Kit Styling and Tuning Click and View Audi S4 Body Kit Styling and Tuning Click and View Audi A5 Body Kit Styling and Tuning Click and View Audi S5 Body Kit Styling and Tuning Click and View Audi A6 Body Kit Styling and Tuning Click and View Audi S6 Body Kit Styling and Tuning Click and View Audi A8 Body Kit Styling and Tuning Click and View Audi S8 Body Kit Styling and Tuning Click and View Audi TT Body Kit Styling and Tuning Click and View Audi Q5 Body Kit Styling and Tuning Click and View Audi Q7 Body Kit Styling and Tuning Click and View Audi R8 Body Kit Styling and Tuning
A3 Body Kits:: A4 Body Kits :: S4 Body Kits :: A5 Body Kits :: S5 Body Kits :: A6 Bodykits :: S6 Bodykits :: A8 Body Kits :: S8 Body Kits :: TT Body Kits :: Q5 Body Kits :: Q7 Body Kits :: R8 Bodykits

Audi A6 4B (C5) 1998-2001 Gets Rs6 Autobahn Bodykit



Pre-facelift A6 -

Click and View Euro Speed Look
Owners of the Facelift Audi A6 (2002 and on) - Click Here Now!


This European design is specifically targeted for the Audi enthusiast's "pre-facelift" narrow body USA model A6 (years 1998-2001). The design will fit an A6 with either the 2.8 or 2.7T motor. To determine if your car is "pre-facelift" versus "facelift", look at the upper center grill. The facelift version has square lower corners - the pre-facelift model (example shown above) has round lower corners. A version of the front bumper will be available for the facelift A6 (2002>  3.0 and 2.7T motors) and a 4.2 model version will also be made available through LLTEK shortly.

Click and View Pre-Facelift/Facelift Grill Comparison   For A Pre-Facelift/Facelift Photo Comparison - Click Here Now!

To install the front bumper it will be necessary to purchase a set of modified OEM European impact bar supports from LLTEK - the support bars will be used to replace the current set. The North American impact bar is subject to a small modification at each end. Installation is straightforward. The OEM foglights will not fit the R6 corner mounts and openings. LLTEK will offer 3 lighting upgrade options, one of which will be real HID Xenon utilizing Phillips D2 ballast systems. The other options consist of a choice between 5th Generation light blue-tint glass fog or driving lights. When the bumper is ordered with LLTEK's MatchPaint option, LLTEK pre-installs the lights for free.

The R6 front bumper is included as part of LLTEK's optional MatchPaint program. When the MatchPaint option is taken, LLTEK will pre-install all 3 lower grills. Also, when the MatchPaint option is taken a second color (black) is provided for the accents that surround the fog and air intake cover.

At a later date, LLTEK expects to offer a set of side sills and a new R6 rear bumper design for the A6 car. LLTEK worked with the manufacturer very closely to develop a special fitting program for USA specification cars. The manufacturer makes several modifications in Germany for LLTEK plus LLTEK makes a final modification to the impact bar supports to complete the supplied changes. Without these changes the bumper cannot be installed. The profile of the front bumper is shortened by about two inches.

LLTEK will also offer 2 additional options. For a small charge, LLTEK will delete the European license indentation. Also, a lower aero splitter is available. The R6 front bumper is oversized and ships by truck only in a special extra strong protective box. For more information contact LLTEK by phone Toll Free at 1 888 465 5835.


Front Bumper and Optional Aero Splitter
RSix Front Bumper for the Audi A6 (4B) C5 - Narrow Body 1998>2001
Part Number Part Description PC Price
DTA64B-01(C5) R6 Front Bumper Euro-version (NOT 4.2) - pre-FL II $855
DTA64B-03(C5) OEM Euro Impact Bar Supports 98>01 (L&R)
Required Parts for R6 Front Bumper Upgrade DTA64B-01		 n/a $199
LL00-19 *Front Bumper Mesh (Large)
choice of grill required for DTA64B-01		 MM $88
LL00-20 *Front Bumper Mesh (Small)
choice of grill required for DTA64B-01		 MM $44
DTA64B(C5) Black *R6 Mesh Grill Kit - 2 Corner Grills
PLUS Black-Rimmed Center Grill
choice of grill required for DTA64B-01		 n/a $222
SSHAL-03 *Halogen hi-performance fog lights
choice of light required for DTA64B-01		 n/a $122
SSHAL-04 *Halogen hi-performance driving lights
choice of light required for DTA64B-01		 n/a $122
SSDS2-01 *HID Xenon driving lights
choice of light required for DTA64B-01		 n/a $777
KAM4B-11 Mesh sport grill for A6 (pre-facelift narrow body 98>01)
 n/a $166
EXA4B5-13FIB Lower Adjustable Splitter
Also Fits OEM Front Bumper		 BB $288
DT4B-LCPLTdel Optional Licence Plate Indentation Removal n/a $122
DTA64B-02(C5) Crash Bar for Front Bumper Euro-version n/a $199
DTA64B-08(C5)
L&R		 (Left & Right) R6 Side Skirts (NOT 4.2) DDx2 $488
DTA64B-07(C5)
Sedan		 R6 Sedan Rear Bumper (NOT 4.2) - pre-FL
includes small mesh		 II $777
DTA64B-07(C5)
Avant		 R6 Avant Rear Bumper (NOT 4.2) - pre-FL
includes small mesh		 II $777
DTA64B-10(C5) R6 Rear Bumper Supports (L&R) - pre-FLRequired Parts for R6 Front Bumper Upgrade DTA64B-07 n/a $199
*Free Expert LLTEK Installation - When ordered with MatchPaint Front Bumper DTA64B-01
Note:Original OEM foglights cannot be used with this bumper.

About MatchPaint and Paint Code Pricing

Click and and View LLTek's Page for the Pre-Facelift Audi A6...Click and and View LLTek's Page for the Pre-Facelift Audi A6

Return to LLTEK Home Page... Click and Return to LLTEK Home Page